Ghibli: Laputa - Castle in the Sky (Flapter)

1
July 8, 2017
Here's the box from the donor kit... an Academy Spad XIII
2
July 8, 2017
The kit itself comes from a couple of failed attempts at the Spad XIII. Already partially chopped up!
3
July 8, 2017
Lets's cut some more!
4
July 8, 2017
These pods from an Airfix Gnat will do nicely...
5
July 8, 2017
Pods cut to size and glued together.
6
July 8, 2017
Ok. The engine cowl has been filed down and opened up. I also glued some extra strips to a bit of styrene.
7
July 10, 2017
Some sanding done to check the basic outline... looks okay.
8
July 10, 2017
A bit more sanding and the front pods are glued on. Started on the cockpit.
9
July 10, 2017
Cockpit taking shape. A bit of wing for the floor and some scratch built instrument panels.
10
July 10, 2017
And now for the putty... lots of putty.
11
July 11, 2017
I only used half this kit for my Tintin sub project... hmmm...
12
July 11, 2017
Bingo! I can use this for the underside!
13
July 11, 2017
First, a bit of surgery...
14
July 11, 2017
Yeah... not quite 100% perfect... but you can't be too choosey in a kit-bash, right?
15
July 11, 2017
From the side it looks good.
16
July 11, 2017
The bottom looks good too...
17
July 11, 2017
Hmmm... the front's not quite right, but there's not much I can do about that.
18
July 11, 2017
Covered the gaps with some styrene.
19
July 11, 2017
Ok... I can live with that.
20
July 11, 2017
The side still looks okay.
21
July 11, 2017
A bit of filing to shape, and it looks okay.
22
July 11, 2017
The cockpit is looking pretty good.
23
July 11, 2017
Alright then... let's dive back into the putty!
24
July 13, 2017
Drilled some holes for the hand rails and test fit.
25
July 13, 2017
Okay. Now to get started on the wings... using a bit of sprue and some 1/144 missiles.
26
July 13, 2017
Sprue cut to size and notched.
27
July 13, 2017
Okay, the joints are in place.
28
July 13, 2017
Added some handrail anchor at the top.
29
July 13, 2017
The missile tips should work alright to attach the wings.
30
July 13, 2017
Couldn't resist test fitting the canopy (another leftover from my Tintin submarine build).
31
July 20, 2017
Ok. Added a bit of detail to the cockpit.
32
July 24, 2017
The panel lines needed a "do-over", so I'm attempting some repairs.
33
August 2, 2017
34
August 2, 2017
35
August 2, 2017
36
August 2, 2017
37
August 2, 2017
38
August 3, 2017
39
August 3, 2017
40
August 3, 2017
41
August 3, 2017
42
August 3, 2017
43
August 3, 2017
44
August 3, 2017
45
August 3, 2017
46
August 3, 2017
47
October 30, 2017
48
October 30, 2017
49
October 30, 2017
50
October 30, 2017
51
October 30, 2017
52
October 30, 2017
53
October 30, 2017
54
October 30, 2017

Kommentare

1 June 2024, 10:21 -

Album info

A little kit-bashed scratch-build of the "Flapter" used by the Dora gang of pirates in Laputa: Castle in the Sky. I had a sliced up bit of a failed Academy 1/72 Spad XIII lying about in my spare "odds and ends" box and it struck me how much it looked like a Laputa Flapter. Add the bottom from a 1/100 Me162 Komet (Tamiya) and a lot of sanding, and voila!

Ghibli: Laputa - Castle in the Sky

56 Bilder

1:72

In Bearbeitung

1:100 Messerschmitt Me262A & Me163B (Tamiya 61604)

Alle Alben

Alle Alben anzeigen »